dtc u0131 lost comunication with power stering modul,range rover evouqe

this is a Range Rover Evoque complaint about the heavy steering after we scanned there is a DTC

loss of communication with the steering module the first step we check is this

this large cable should be on standby this is the time for this

this is from the module starting from the speed sensor torque sensor

this uses EPS the Range Rover Evoque uses EPS after we checked it turns out there is no current

the standby current is not present the standby current is not present automatically it is likely that the seek ring is needed

if the Range Rover Evoque seek ring is here

steering F5 80 amperes

friends who have steering have heavy airing usually European and USA cars

if in the TIC there is a loss of communication that could be

the circuit is broken if in Japan usually if it breaks it is an open circuit I also encountered that yesterday

The 2012 Wrangler with the Pentastar has a malfunctioning button.

The buttons on the steering column are also not working, so usually the issue is with the steering wheel if it's the Rubicon.

if this is the one that breaks, this is 80 almost Allah, oh Allah